Epoxy cartridge 1,8 kg (4 lbs)
Product code: LTK05
With SprayCoat epoxy you can easily attach and seal the LinerDrain floor drain insert. The SprayCoat epoxy cartridge is also compatible with the MidiCoater pipe coating system. Also suitable for once-coated floor drains. The SprayCoat epoxy resin has been approved as part of the Boldan In-House Lining System - certification (VTT-C-12120-17).
SprayCoat epoxy resin is good for strength and aging resistance and does not absorb water significantly (test report no. VTT-S-00683-18). SprayCoat epoxy resin has good chemical resistance (for example gasoline and diesel).
Continous heat resistance +60°C, temporary +90°C
You will also need a mixer for the epoxy cartridge: White 300 mm (LTK06) or Green 200 mm (LTK13)
For use with the epoxy cartridge, use 2-Component Press (LTK07) or Pneumatic 2-Component press (LTK08)
Epoxy cartridge A part 1.2 kg and B section 0.6 kg
Open time 10 min
Color: blue
Installation temperature 5-25 °C
Styrene free
Di-isocyanate free
Made in Finland
SprayCoat epoxy resin is good for strength and aging resistance and does not absorb water significantly (test report no. VTT-S-00683-18). SprayCoat epoxy resin has good chemical resistance (for example gasoline and diesel).
Continous heat resistance +60°C, temporary +90°C
You will also need a mixer for the epoxy cartridge: White 300 mm (LTK06) or Green 200 mm (LTK13)
For use with the epoxy cartridge, use 2-Component Press (LTK07) or Pneumatic 2-Component press (LTK08)
Epoxy cartridge A part 1.2 kg and B section 0.6 kg
Open time 10 min
Color: blue
Installation temperature 5-25 °C
Styrene free
Di-isocyanate free
Made in Finland