Maintenance plug DN50 (2'')
Maintenance plug DN50 (2'')
| Tuotekoodi: LTULP0002 |
Maintenance plug DN50 (2'') is a plug for example for cast iron floor drain or for plugging inspection holes in the sewer.
Designed for use with a hole saw DN50 mm (2'').
Outside diameter Ø 65 mm (2 1/2''), suitable for approx. 5 mm (3/16'') thick material.
Made in the EU
Designed for use with a hole saw DN50 mm (2'').
Outside diameter Ø 65 mm (2 1/2''), suitable for approx. 5 mm (3/16'') thick material.
Made in the EU
Oletko tyytyväinen tuotetietoihin?
Jos tuotetiedoissa on puutteita, tai sinulla on muuta kommentoitavaa tuotteesta, anna palautetta. Jos haluat, että sinuun otetaan yhteyttä, lisää viestiin yhteystietosi.
Kommentoi
Liittyvät tuotteet
