Inversion Drum extension hose 6 m / 8'' Storz
Inversion Drum extension hose 6 m / 8'' Storz
| Tuotekoodi: TD0010 |
Extension hose saves money on every installation.
When the inversion nozzle is brought close to the pipe, savings will be generated due to reduced epoxy and liner loss.
Using the extension hose also gives you increased liner capacity.
Compatible with Extruder ProSeries 900 Inversion Drum.
When the inversion nozzle is brought close to the pipe, savings will be generated due to reduced epoxy and liner loss.
Using the extension hose also gives you increased liner capacity.
Compatible with Extruder ProSeries 900 Inversion Drum.
TECHNICAL SPECIFICATIONS
The 8" Storz coupling, 3 lugs
Length 6 m (20 ft)
Hose diameter 200 mm / 8"
Operating temperature -20 °C to 100 °C (-4 °F to 212 °F)
Inner material: Nitrile
Surface material: Nitrile
Textile reinforcement
Safety factor 2.5
Working pressure (20 °C / 68 °F) 10 bar / 145 psi
Made in Finland
Oletko tyytyväinen tuotetietoihin?
Jos tuotetiedoissa on puutteita, tai sinulla on muuta kommentoitavaa tuotteesta, anna palautetta. Jos haluat, että sinuun otetaan yhteyttä, lisää viestiin yhteystietosi.
Kommentoi
