Boldan 1D Liner SN8 DN100
Boldan 1D Liner SN8 DN100
| Tuotekoodi: BOL1DLNR100 |
Easy to install, one-size liner for professional use.
Suitable for relining DN100 / DN110 (4”) pipelines.
Boldan 1D SN8 liners are suitable for relining inside the building, pipes in traffic areas, road construction, and other heavier loads.
The liner is suitable for steam, hot water, or air curing following Boldan® process instructions. Maximum temperature for steam or hot water curing +65°C / 149°F.
The liner must be protected against radial expansion with a calibration hose (inspection hatches, manholes, beginning and end, and other free spaces).
Allows lining up to 90°, the result is almost wrinkle-free.
Suitable for relining DN100 / DN110 (4”) pipelines.
Boldan 1D SN8 liners are suitable for relining inside the building, pipes in traffic areas, road construction, and other heavier loads.
The liner is suitable for steam, hot water, or air curing following Boldan® process instructions. Maximum temperature for steam or hot water curing +65°C / 149°F.
The liner must be protected against radial expansion with a calibration hose (inspection hatches, manholes, beginning and end, and other free spaces).
Allows lining up to 90°, the result is almost wrinkle-free.
TECHNICAL FEATURES
Material: 100 % Polyester
Membrane: Polyurethane (PUR-HD)
Material thickness: 4.5 mm with membrane
Nip Gap: 10.0 mm
Epoxy consumption: approx. 1.10 kg / m - 0.74 lb / ft
Installation pressure: 0.4 - 0.7 bar / 5.8 - 10.2 psi
Curing pressure: 0.3 - 0.5 bar / 4.4 - 7.3 psi
Maximum pressure: 0.8 bar / 11.6 psi
Compatible with the following epoxy resins:
Boldan Oy: BDA / BD / BDA + / BX / BE / BA / BC / B1
Package size 50 m / 164 ft
Made in Finland
| BOL1DLNR100 | |
|---|---|
| 012374 | 150 |
| 012380 | 50 |
| 012391 | 47 |
Oletko tyytyväinen tuotetietoihin?
Jos tuotetiedoissa on puutteita, tai sinulla on muuta kommentoitavaa tuotteesta, anna palautetta. Jos haluat, että sinuun otetaan yhteyttä, lisää viestiin yhteystietosi.
Kommentoi
Liittyvät tuotteet
